21 research outputs found
Spectrum Sharing, Latency, and Security in 5G Networks with Application to IoT and Smart Grid
The surge of mobile devices, such as smartphones, and tables, demands additional capacity. On the other hand, Internet-of-Things (IoT) and smart grid, which connects numerous sensors, devices, and machines require ubiquitous connectivity and data security. Additionally, some use cases, such as automated manufacturing process, automated transportation, and smart grid, require latency as low as 1 ms, and reliability as high as 99.99\%. To enhance throughput and support massive connectivity, sharing of the unlicensed spectrum (3.5 GHz, 5GHz, and mmWave) is a potential solution. On the other hand, to address the latency, drastic changes in the network architecture is required. The fifth generation (5G) cellular networks will embrace the spectrum sharing and network architecture modifications to address the throughput enhancement, massive connectivity, and low latency.
To utilize the unlicensed spectrum, we propose a fixed duty cycle based coexistence of LTE and WiFi, in which the duty cycle of LTE transmission can be adjusted based on the amount of data. In the second approach, a multi-arm bandit learning based coexistence of LTE and WiFi has been developed. The duty cycle of transmission and downlink power are adapted through the exploration and exploitation. This approach improves the aggregated capacity by 33\%, along with cell edge and energy efficiency enhancement. We also investigate the performance of LTE and ZigBee coexistence using smart grid as a scenario.
In case of low latency, we summarize the existing works into three domains in the context of 5G networks: core, radio and caching networks. Along with this, fundamental constraints for achieving low latency are identified followed by a general overview of exemplary 5G networks. Besides that, a loop-free, low latency and local-decision based routing protocol is derived in the context of smart grid. This approach ensures low latency and reliable data communication for stationary devices.
To address data security in wireless communication, we introduce a geo-location based data encryption, along with node authentication by k-nearest neighbor algorithm. In the second approach, node authentication by the support vector machine, along with public-private key management, is proposed. Both approaches ensure data security without increasing the packet overhead compared to the existing approaches
A Gossip Algorithm based Clock Synchronization Scheme for Smart Grid Applications
The uprising interest in multi-agent based networked system, and the numerous
number of applications in the distributed control of the smart grid leads us to
address the problem of time synchronization in the smart grid. Utility
companies look for new packet based time synchronization solutions with Global
Positioning System (GPS) level accuracies beyond traditional packet methods
such as Network Time Proto- col (NTP). However GPS based solutions have poor
reception in indoor environments and dense urban canyons as well as GPS antenna
installation might be costly. Some smart grid nodes such as Phasor Measurement
Units (PMUs), fault detection, Wide Area Measurement Systems (WAMS) etc.,
requires synchronous accuracy as low as 1 ms. On the other hand, 1 sec accuracy
is acceptable in management information domain. Acknowledging this, in this
study, we introduce gossip algorithm based clock synchronization method among
network entities from the decision control and communication point of view. Our
method synchronizes clock within dense network with a bandwidth limited
environment. Our technique has been tested in different kinds of network
topologies- complete, star and random geometric network and demonstrated
satisfactory performance
A Spectrum Sharing based Metering Infrastructure for Smart Grid Utilizing LTE and WiFi
In advanced metering infrastructure (AMI) of smart grid, WiFi is an appropriate choice for its bidirectional communication requirement to transmit data to the billing center. But, WiFi functions in the free spectrum bands and LTE also requires to use the same free bands for its network expansion being licensed spectrum is limited and expansive. LTE and WiFi can operate simultaneously in the 3.5 GHz band (also known as citizen broadband radio service (CBRS)), which has large amount of free and clean spectrum. In this paper, we propose a smart grid metering infrastructure based on fixed duty cycled LTE and WiFi, where smart meters and its’ data collectors (known as Access Point) use WiFi and LTE, respectively, for transferring data. Under a system level simulation environment, we investigated the LTE-WiFi coexistence performance in CBRS band considering a time division duplexing (TDD)-LTE associated with FTP traffic, and IEEE 802.11n (WiFi). The simulation performance demonstrates a good neighborhood coexistence between WiFi and LTE, which makes it a potential communication solution for the AMI
LTE and Wi-Fi Coexistence in Unlicensed Spectrum with Application to Smart Grid: A Review
Long Term Evolution (LTE) is expanding its utilization in unlicensed band by
deploying LTE Unlicensed (LTEU) and Licensed Assisted Access LTE (LTE-LAA)
technology. Smart Grid can take the advantages of unlicensed bands for
achieving two-way communication between smart meters and utility data centers
by using LTE-U/LTE-LAA. However, both schemes must co-exist with the incumbent
Wi-Fi system. In this paper, several co-existence schemes of Wi-Fi and LTE
technology is comprehensively reviewed. The challenges of deploying LTE and
Wi-Fi in the same band are clearly addressed based on the papers reviewed.
Solution procedures and techniques to resolve the challenging issues are
discussed in a short manner. The performance of various network architectures
such as listenbefore- talk (LBT) based LTE, carrier sense multiple access with
collision avoidance (CSMA/CA) based Wi-Fi is briefly compared. Finally, an
attempt is made to implement these proposed LTEWi- Fi models in smart grid
technology.Comment: submitted in 2018 IEEE PES T&
Recommended from our members
Data Transmission in Quantized Consensus
In the world of networked system, average consensus is an important dimension of co-ordinate control and cooperation. Since the communication medium is digital, real value cannot be transmitted and we need to perform quantization before data transmission. But for the quantization, error is introduced in exact value and initial average is lost. Based on this limitation, my 16 bit quantization method (sending MSB in 1-4 cycle and MSB+LSB in 5th cycle) reduces error significantly and preserves initial average. Besides, it works on all types of graphs (star, complete, ring, random geometric graph). My other algorithm, distributing averaging algorithm (PQDA) with probabilistic quantization also works on random geometric graph, star, ring and slow co-herency graph. It shows significant reduced error and attain strict consensus
Online power quality disturbance detection by support vector machine in smart meter
Power quality assessment is an important performance measurement in smart grids. Utility companies are interested in power quality monitoring even in the low level distribution side such as smart meters. Addressing this issue, in this study, we propose segregation of the power disturbance from regular values using one-class support vector machine (OCSVM). To precisely detect the power disturbances of a voltage wave, some practical wavelet filters are applied. Considering the unlimited types of waveform abnormalities, OCSVM is picked as a semi-supervised machine learning algorithm which needs to be trained solely on a relatively large sample of normal data. This model is able to automatically detect the existence of any types of disturbances in real time, even unknown types which are not available in the training time. In the case of existence, the disturbances are further classified into different types such as sag, swell, transients and unbalanced. Being light weighted and fast, the proposed technique can be integrated into smart grid devices such as smart meter in order to perform a real-time disturbance monitoring. The continuous monitoring of power quality in smart meters will give helpful insight for quality power transmission and management
CBRS Spectrum Sharing between LTE-U and WiFi: A Multiarmed Bandit Approach
The surge of mobile devices such as smartphone and tablets requires additional capacity. To achieve ubiquitous and high data rate Internet connectivity, effective spectrum sharing and utilization of the wireless spectrum carry critical importance. In this paper, we consider the use of unlicensed LTE (LTE-U) technology in the 3.5 GHz Citizens Broadband Radio Service (CBRS) band and develop a multiarmed bandit (MAB) based spectrum sharing technique for a smooth coexistence with WiFi. In particular, we consider LTE-U to operate as a General Authorized Access (GAA) user; hereby MAB is used to adaptively optimize the transmission duty cycle of LTE-U transmissions. Additionally, we incorporate downlink power control which yields a high energy efficiency and interference suppression. Simulation results demonstrate a significant improvement in the aggregate capacity (approximately 33%) and cell-edge throughput of coexisting LTE-U and WiFi networks for different base station densities and user densities